### Strength of materials (ME-3002) ## Objectives

To familiarize the students with the fundamentals of deformation, stresses, strains in structural elements.

## Syllabus

UNIT 1:stresses in members of a structure, axial loading, normal stress, shear stress, analysis of simple structures, stepped rods, members in series and parallel: stress strain diagram, Hooke’s law, stress due to temperature, Poisson’s ratio, Bulk modulus, shear strain, relation among elastic constants, residual stress, fiber reinforced composite materials, strain energy under axial loads and stresses due to impact of falling weights. Transformation of stress and strain, principal stresses, normal and shear stress, Mohr’s circle and its application to two and three dimensional analysis.

UNIT 2: pure bending, symmetric member, deformation and stress, bending of composite sections, eccentric axial loading, shear force and BM diagram, relationship among load, shear and BM, shear stresses in beams, strain energy in bending, deflection of beams, equation of elastic curve, Macaulay’s method and Area moment method for deflection of beams.

UNIT 3: Tensional stresses in a shafts, deformation in circular shaft, angle of twist, stepped and hollow transmission shafts.

UNIT 4: maximum normal stress & shear stress theory; maximum normal and shear strain energy theory; maximum distortion energy theory; application of theories to different materials and loading conditions.

UNIT 5: stability of structures, Euler’s formula for columns with different end conditions, Rankine’s formula.

• Unit 1
• Unit 2
• Unit 3
• Unit 4
• Unit 5

## Outcomes

1. Know the concepts of stress and strain.
2. Analyze the beam of different cross sections for shear force, bending moment, slope and deflection.
3. Understand the concepts necessary to design the structural elements and pressure vessels.1. Know the concepts of stress and strain.

## References

1. Beer FP, Johnson Mechanics of Materials ,Sixth Edition ;Mc Graw Hills
2 Debabrata Nag & Abhijet Chanda :Strength of Materials : Wiley
3 Rattan; Strength of materials;Second Edition , Mc Graw Hills
4. Nash William; Schaum’s Outline Series; forth Edition Strength of Materials;Mc Graw Hills
5. Singh Arbind K; Mechanics of Solids; PHI
6. Sadhu Singh; Strength of Materials; Khanna Pub.
7 R Subramannian , Strength of materials OXFORD University Press ,Third Edition .
8 S Ramamurthum , Strength of materials , Dhanpat Rai

## List of Experiments

1. Standard tensile test on MS and CI test specimen with the help of UTM
2. Direct/ cross Shear test on MS and CI specimen
3. Transverse bending test on wooden beams to obtain modulus of rupture
4. Fatigue test
5. Brinell Hardness tests
6. Vicker hardness test
7. Izod/Charpy test
8 Rockwell Hardness test